Norm

NEN-EN-ISO 17641-2:2005 en

Destructieve beproevingen van lassen in metalen - Beproevingen op warmscheuren in lassen - Booglasprocessen - Deel 2: Beproevingen bij eigenbelasting

  • Deze norm is ingetrokken sinds 13-11-2015

73,12

Over deze norm

Status Ingetrokken
Aantal pagina's 14
Commissie Lassen en verwante processen
Gepubliceerd op 01-04-2005
Taal Engels
This standard specifies the required specimens, the test piece dimensions and the procedures to be followed to carry out self-restraint hot cracking tests. The following tests are described: - T-joint weld cracking test - Weld metal tensile test - Longitudinal bend test The tests are designed to provide information about the hot cracking sensitivity of weld metals. The tests are not suitable for the assessment of parent materials. The standard applies primarily to fully austenitic stainless steels; nickel, nickel base and nickel copper weld metals. The standard can also be used for other weld metals. This standard describes only how to carry out the tests and report the results. It does not give any acceptance criteria.

Details

ICS-code 25.160.40
Nederlandse titel Destructieve beproevingen van lassen in metalen - Beproevingen op warmscheuren in lassen - Booglasprocessen - Deel 2: Beproevingen bij eigenbelasting
Engelse titel Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Self-restraint tests
Vervangt
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen