Norm

NEN-EN-ISO 17654:2000 Ontw. en

Destructieve beproevingen van lasverbindingen in metalen - Inwendige drukbeproeving van doorlopende rolnaadlasverbindingen

  • Deze norm is ingetrokken sinds 14-10-2003

17,55

Over deze norm

Status Ingetrokken
Aantal pagina's 7
Commissie Lassen en verwante processen
Gepubliceerd op 01-04-2000
Taal Engels
Specifies the pressure test method to be applied to seam welded specimens of different types of material, e.g. uncoated and coated ferritic steels and uncoated austenitic steel sheet with single sheet thicknesses ranging from 0,3 mm to 3,2 mm. The purpose of this pressure test is to determine the influence of material type, welding parameters and of other factors on a tank, a vessel or a container for liquids or gases, which are manufactured by resistance seam welding. Using this test, it is possible to evaluate burst pressure and the leak tightness of the weld seams.

Details

ICS-code 25.160.40
Nederlandse titel Destructieve beproevingen van lasverbindingen in metalen - Inwendige drukbeproeving van doorlopende rolnaadlasverbindingen
Engelse titel Destructive tests on welds in metallic materials - Internal pressure test on continuous seam welds
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen