Norm

NEN-EN-ISO 18592:2007 Ontw. en

Weerstandlassen - Destructief onderzoek van lassen - Methode voor de vermoeiingsbeproeving van meerpuntslassen

  • Deze norm is ingetrokken sinds 14-01-2010

31,83

Over deze norm

Status Ingetrokken
Aantal pagina's 36
Commissie Lassen en verwante processen
Gepubliceerd op 01-12-2007
Taal Engels
This document specifies test specimens and procedures for performing constant load amplitude fatigue tests on multi-spot-welded- and multi-axial-specimens specimens in the thickness range from 0,5 mm to 4,5 mm at room temperature and a relative humidity of max. 80 %. The applicability of the standard to larger thicknesses may be limited by the mechanical properties such as yield strength and formability of the specimen material. The thickness range for Advanced High Strength Steels (AHSS) is generally below 3,0 mm. Greater thicknesses for e. g. aluminium alloys are permissible. Depending on the specimen used, the results allow an evaluation of the fatigue behaviour of: a) Spot welds subjected to defined uniform load distribution; b) spot welds subjected to defined non-uniform load distribution; c) spot welds subjected to different defined combinations of shear-, peel-and normal-tension loads; and d) the tested specimen.

Details

ICS-code 25.160.40
Nederlandse titel Weerstandlassen - Destructief onderzoek van lassen - Methode voor de vermoeiingsbeproeving van meerpuntslassen
Engelse titel Resistance welding - Destructive test of welds - Method for the fatigue testing of multi-spot-welded specimens
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen