NEN-EN-ISO 19085-10:2019 en

Houtbewerkingsmachines - Veiligheid- Deel 10: Zaagtafels

  • Deze norm is ingetrokken sinds 01-03-2020

138,57 151,04 Incl BTW

Over deze norm

Status Ingetrokken
Aantal pagina's 35
Commissie Houtbewerkingsmachines
Gepubliceerd op 01-06-2019
Taal Engels
NEN-EN-ISO 19085-1 gives the safety requirements and measures for displaceable building site saws, designed to cut wood and materials with similar physical characteristics to wood, hereinafter referred to as “machines”. It deals with all significant hazards, hazardous situations and events as listed in Clause 4, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases have been taken into account. The machine can also be fitted with a device for the saw blade to be manually raised and lowered through the table, whose hazards have been dealt with. This document does not apply to the following: a) machines with a maximum saw blade diameter smaller than 350 mm or greater than 500 mm; b) hand-held woodworking machines, including any adaptation permitting their use in a different mode, i.e. bench mounting; c) machines with a device to tilt the saw blade for angle cutting, machines with more than one saw blade rotational speed and machines equipped with a sliding table. This document is not applicable to machines intended for use in potentially explosive atmospheres or to machines manufactured prior to the date of its publication


ICS-code 13.110
Nederlandse titel Houtbewerkingsmachines - Veiligheid- Deel 10: Zaagtafels
Engelse titel Woodworking machines - Safety - Part 10: Building site saws (contractor saws)
Vervangen door



Ga naar winkelwagen