Norm

NEN-EN-ISO 19432:2004 Ontw. en

Machines en apparatuur voor de bouw - Draagbare, met de hand geleide afkortslijpmachine aangedreven door zuigermotor met inwendige verbranding - Veiligheidseisen en beproeven

  • Deze norm is ingetrokken sinds 05-04-2006

38,91

Over deze norm

Status Ingetrokken
Aantal pagina's 48
Commissie Mobiele bouwmachines
Gepubliceerd op 01-10-2004
Taal Engels
This standard deals with the significant hazards and specifies safety requirements and their verification for design and construction of portable, hand-held, combustion-engine driven, cut-off machines, designed only for use by one operator. This standard applies to portable, hand-held internal combustion engine driven machines using a rotating cutoff wheel which are designed for cutting construction materials such as asphalt, concrete, stone and metal. The requirements apply to cut-off machines purposely designed for the use of cut-off wheels with a maximum diameter of 406 mm. This standard is also limited to cut-off machines utilising cut-off wheels with bonded abrasive an d diamond and CBN-abrasive materials and that are centre-mounted on and driven by a spindle shaft. This standard applies to cut-off machines where the top of the wheel rotates away from the operator, see figure 1. Cut-off machines covered by this document are designed for use by persons having read and understood the safety requirements in the .Instruction handbook. and using the appropriate personal protective equipment (PPE). It describes methods for the elimination or reduction of hazards arising from their use. In addition it specifies the type of information on safe working practices to be provided with the machine. This standard deals with all significant hazards for the hand-held use of the cut-off machine (for details see clause 4). Cut-off wheel specifications are not included in this standard. The environmental aspects, except for noise have not been considered in this standard. This standard is not applicable to machines, which are manufactured before the date of publication of this document.

Details

ICS-code 91.220
Nederlandse titel Machines en apparatuur voor de bouw - Draagbare, met de hand geleide afkortslijpmachine aangedreven door zuigermotor met inwendige verbranding - Veiligheidseisen en beproeven
Engelse titel Building construction cachinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements and testing
Vervangt
Vervangen door
Normatieve verwijzingen
  • 98/37/EG, Machines

Winkelwagen

Subtotaal:

Ga naar winkelwagen