Norm

NEN-EN-ISO 21013-3:2016 en

Cryogene vaten - Drukafblaas toebehoren voor cryogene diensten - Deel 3: Bepaling van de benodigde afvoercapaciteit

34,42

Over deze norm

Status Definitief
Aantal pagina's 4
Commissie Cryogene vaten
Gepubliceerd op 01-06-2016
Taal Engels
NEN-En-ISO 21013-3 provides separate calculation methods for determining the required mass flow to be relieved for each of the following specified conditions: - vacuum-insulated vessels with insulation system (outer jacket + insulating material) intact under normal vacuum, outer jacket at ambient temperature, inner vessel at temperature of the contents at the specified relieving pressure; - vacuum-insulated vessels with insulation system (outer jacket + insulating material) intact under normal vacuum, outer jacket at ambient temperature, inner vessel at temperature of the contents at the specified relieving pressure, pressure regulator of the pressure build-up system functioning at full potential; - vacuum or non-vacuum-insulated vessels with insulation system remaining in place, but with loss of vacuum in the case of vacuum-insulated vessels, outer jacket at ambient temperature, inner vessel at temperature of the contents at the specified relieving pressure or vacuum or non-vacuum-insulated vessels with insulation system remaining fully or partially in place, but with loss of vacuum in the case of vacuum-insulated vessels, fire engulfment, inner vessel at temperature of the contents at the specified relieving pressure; - vacuum-insulated vessels containing fluids with saturation temperature below 75 K at 1 bar with insulation system remaining in place, but with loss of vacuum with air or nitrogen in the vacuum space; - vacuum insulated vessels containing fluids with saturation temperature below 75 K at 1 bar with insulation system remaining in place, but with loss of vacuum with air or nitrogen in the vacuum space with fire engulfment; - vessels with insulation system totally lost and fire engulfment. Good engineering practice based on well-established theoretical physical science needs to be adopted to determine the required mass flow where an appropriate calculation method is not provided for an applicable condition. Recommendations for pressure relief devices for cryostats are given in Annex A.

Details

ICS-code 23.020.40
23.060.40
Nederlandse titel Cryogene vaten - Drukafblaas toebehoren voor cryogene diensten - Deel 3: Bepaling van de benodigde afvoercapaciteit
Engelse titel Cryogenic vessels - Pressure-relief accessories for cryogenic service - Part 3: Sizing and capacity determination
Vervangt
Normatieve verwijzingen
  • 2014/68/EU,

Winkelwagen

Subtotaal:

Ga naar winkelwagen