Norm

NEN-EN-ISO 22007-2:2015 en

Kunststoffen - Bepaling van thermische geleidbaarheid en thermische verspreidbaarheid - Deel 2: Niet-stationaire vlakke warmtebronmethode (warme schijf)

106,87

Over deze norm

Status Definitief
Aantal pagina's 20
Commissie Kunststoffen
Gepubliceerd op 01-09-2015
Taal Engels
NEN-EN-ISO 22007-2 specifies a method for the determination of the thermal conductivity and thermal diffusivity, and hence the specific heat capacity per unit volume, of plastics. The experimental arrangement can be designed to match different specimen sizes. Measurements can be made in gaseous and vacuum environments at a range of temperatures and pressures. This method is suitable for testing homogeneous and isotropic materials, as well as anisotropic materials with a uniaxial structure. The homogeneity of the material should extend throughout the specimen and no thermal barriers (except those next to the probe) should be present within a range defined by the probing depth(s) (see 3.2 below). The method is suitable for materials having values of thermal conductivity, λ, in the approximate range 0,010 W·m-1·K-1 < λ < 500 W·m-1·K-1 and values of thermal diffusivity, α, in the range 5 × 10-8 m2·s-1 < α < 10-4 m2·s-1, and for temperatures, T, in the approximate range 50 K < T < 1 000 K. The thermal-transport properties of liquids can also be determined, provided care is taken to minimize thermal convection.

Details

ICS-code 83.080.01
Nederlandse titel Kunststoffen - Bepaling van thermische geleidbaarheid en thermische verspreidbaarheid - Deel 2: Niet-stationaire vlakke warmtebronmethode (warme schijf)
Engelse titel Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen