NEN-EN-ISO 22282-4:2008 Ontw. en

Geotechnisch onderzoek en beproeving - Geohydrologische beproeving - Deel 4: Pompproef

  • Deze norm is ingetrokken sinds 14-06-2012


Over deze norm

Status Ingetrokken
Aantal pagina's 31
Commissie Geotechniek
Gepubliceerd op 01-01-2008
Taal Engels
This standard deals with requirements for pumping tests as part of geotechnical investigation service in accordance with EN 1997-1 and prEN 1997-2. A pumping test consists in principle of: - drawing down the piezometric surface of the groundwater by pumping from a well (the test well); - measuring the pumped discharge and the water level in the test well and piezometers, before, during and after pumping, as a function of time. The document applies to pumping tests performed on aquifers whose permeability is such that pumping from a well can create a lowering of the piezometric head within hours or days depending on the ground conditions and the purpose. It covers pumping tests carried out in soils and rock. The tests concerned by this document are those intended for evaluating the hydrodynamic parameters of an aquifer and well parameters, such as: - global permeability of the aquifer, - radius of influence of pumping,;pumping rate of a well, - response of drawdown in an aquifer during pumping, - skin effect, - well storage.


ICS-code 93.020
Nederlandse titel Geotechnisch onderzoek en beproeving - Geohydrologische beproeving - Deel 4: Pompproef
Engelse titel Geotechnical investigation and testing - Geohydraulic testing - Part 4: Pumping test
Vervangen door



Ga naar winkelwagen