Norm

NEN-EN-ISO 22477-5:2010 2e Ontw. en

Geotechnisch onderzoek en beproeving - Beproeving van geotechnische constructies - Deel 5: Beproeving van verankeringen

51,12

Over deze norm

Status Ontwerp
Aantal pagina's 72
Gepubliceerd op 01-01-2010
Taal Engels
This Standard establishes specifications for the execution of tension load tests where an anchor grouted in the ground, as defined in EN 1997-1, is loaded by step (method 3) or in incremental cycles (methods 1 and 2 from a datum load to a maximum test load. The displacement of the anchor head is measured over a period of time at each step (method 3) or at maximum load in each incremental cycle (method 1). The loss of load is measured over a period of time, at maximum load after lock off, in each incremental cycle (method 2). This standard provides specifications for three types of tension tests: investigation tests, suitability tests and acceptance tests. These tests are defined by EN 1997-1 as: - tests aimed at estimating the pull-out resistance (investigation tests), - tests aimed at checking the suitability of the execution method in the actual conditions of the construction site (suitability tests), - Tests aimed at checking that each anchor will resist at least the design load (acceptance tests). For the different types of tests only one method shall be used in each project. The method must be prescribed in the project specifications. The standard provides specifications for the experimental devices, the measurement apparatus, the test procedures, the definition and the presentation of the test results and the content of records. Guidance is given on the determination of the measured value of the pull out resistance Ra of an anchor on the basis of investigation tests and for checking of the displacement behaviour of an anchor on the basis of suitability tests and acceptance tests.

Details

ICS-code 93.020
Nederlandse titel Geotechnisch onderzoek en beproeving - Beproeving van geotechnische constructies - Deel 5: Beproeving van verankeringen
Engelse titel Geotechnical investigation and testing - Testing of geotechnical structures - Part 5: Testing of anchorages
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen