Norm

NEN-EN-ISO 22825:2003 Ontw. en

Niet-destructieve beproeving van lassen - Ultrasone methode - Beproeving van lassen in austenitische staal- en nikkelgebaseerde legeringen

  • Deze norm is ingetrokken sinds 25-07-2006

23,85 28,86 Incl BTW

Over deze norm

Status Ingetrokken
Aantal pagina's 14
Gepubliceerd op 01-10-2003
Taal Engels
This International Standard specifies the approach to be followed when developing procedures for the ultrasonic testing of t he following welds: - welds in austenitic stainless steels; - welds in nickel-based alloys; - welds in duplex steels; - dissimilar metal welds. The purposes of the testing can be very different, e.g.: - for the assessment of quality level (manufacturing); - for the detection of specific indications induced in service. Acceptance levels are not included in this International Standard, but can be applied in accordance with the scope of the testing (see Clause 4). The requirements of this International Standard are applicable to both manual and mechanized testing.

Details

ICS-code 25.160.40
Nederlandse titel Niet-destructieve beproeving van lassen - Ultrasone methode - Beproeving van lassen in austenitische staal- en nikkelgebaseerde legeringen
Engelse titel Non-destructive examination of welds - Ultrasonic methods - Examination of welds in austenitic steels and nickel based alloys
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen