Norm

NEN-EN-ISO 3506-1:1997 en

Mechanische eigenschappen van bevestigingsartikelen van corrosievast staal - Deel 1: Bouten, schroeven en tapeinden

  • Deze norm is ingetrokken sinds 26-11-2009

98,05

Over deze norm

Status Ingetrokken
Aantal pagina's 21
Commissie Onderdelen voor bevestiging
Gepubliceerd op 01-12-1997
Taal Engels
Specifies the mechanical properties of bolts, screws and studs made from austenitic, martensitic and ferritic grades of corrosion-resistant stainless steels when tested at an ambient temperature range of 15 °C to 25 °C. Properties will vary at higher or lower temperature. It applies to bolts, screws and studs - with nominal diameters up to and including 39 mm, - of triangular ISO metric threads with diameters and pitches according to ISO 68, ISO 261 and ISO 262, - of any shape. The aim of the standard is a classification into property classes of corrosion resistant stainless steel fasteners. Some materials can be used at temperatures down to -200 °C, some can be used at temperatures up to +800 °C in air. Information on the influence of temperature on mechanical properties is found in Annex F.

Details

ICS-code 21.060.10
Nederlandse titel Mechanische eigenschappen van bevestigingsartikelen van corrosievast staal - Deel 1: Bouten, schroeven en tapeinden
Engelse titel Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 1: Bolts, screws and studs
Vervangt
Vervangen door
Normatieve verwijzingen
  • 97/23/EG, Drukapparatuur (PED)

Winkelwagen

Subtotaal:

Ga naar winkelwagen