Norm

NEN-EN-ISO 5263-2:2003 Ontw. en

Celstof - Natte laboratoriumontvezeling - Deel 2: Desintegratie van mechanische celstof bij 20 °C

  • Deze norm is ingetrokken sinds 20-09-2004

25,62

Over deze norm

Status Ingetrokken
Aantal pagina's 10
Gepubliceerd op 01-10-2003
Taal Engels
This part of ISO 5263 specifies an apparatus and the procedures for the laboratory-wet disintegration of mechanical pulps that do not exhibit latency or pulps where latency has already been removed. This apparatus and procedure are required for preparation of the sample in a number of other International Standards dealing with pulps. In principle, this method is applicable to all kind of mechanical pulps that do not exhibit latency, including recovered fibres from mechanical pulps. It is not suitable for mechanical pulps that exhibit latency for which the disintegration procedure described in ISO 5263-3 shall be used. ISO 5263-2 is applicable to all kind of mechanical pulps (i.e. mechanical, semichemical and chemimechanical pulps) not exhibiting latency. Mechanical pulps shall be disintegrated according to the procedure described in Part 2 or Part 3 of ISO 5263 where pulps exhibiting latency shall be disintegrated according to Part 3. Chemical pulps, including recovered fibre from chemical pulps, shall be disintegrated according to the procedure described in ISO 5263-1.

Details

ICS-code 85.040
Nederlandse titel Celstof - Natte laboratoriumontvezeling - Deel 2: Desintegratie van mechanische celstof bij 20 °C
Engelse titel Pulps - Laboratory wet disintegration - Part 2: Disintegration of mechanical pulps at 20 °C
Vervangt
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen