Norm

NEN-EN-ISO 636:2008 en

Lastoevoegmaterialen - Staven, draad, lasmetaal voor het TIG-lassen van ongelegeerd staal en fijnkorrelig staal - Indeling

  • Deze norm is ingetrokken sinds 14-03-2016

52,53

Over deze norm

Status Ingetrokken
Aantal pagina's 11
Commissie Lassen en verwante processen
Gepubliceerd op 01-06-2008
Taal Engels
This International Standard specifies requirements for classification of rods and wires in the as-welded condition and in the post-weld heat-treated condition for tungsten inert gas welding of non-alloy and fine grain steels with a minimum yield strength of up to 500 MPa or a minimum tensile strength of up to 570 MPa. This International Standard is a combined specification providing classification utilizing a system based upon the yield strength and the average impact energy of 47 J of all-weld metal, or utilizing a system based upon the tensile strength and the average impact energy of 27 J of all-weld metal. 1) Paragraphs and tables which carry the suffix letter "A" are applicable only to rods and wires classified to the system based upon the yield strength and the average impact energy of 47 J of all-weld metal in accordance with this International Standard. 2) Paragraphs and tables which carry the suffix letter "B" are applicable only to rods and wires classified to the system based upon the tensile strength and the average impact energy of 27 J of all-weld metal in accordance with this International Standard. 3) Paragraphs and tables which have neither the suffix letter "A" nor the suffix letter "B" are applicable to all rods and wires classified in accordance with this International Standard.

Details

ICS-code 25.160.20
Nederlandse titel Lastoevoegmaterialen - Staven, draad, lasmetaal voor het TIG-lassen van ongelegeerd staal en fijnkorrelig staal - Indeling
Engelse titel Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification
Vervangt
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen