Norm

NEN-EN-ISO 6860:1995 en

Verven en vernissen - Buigproef (conische doorn)

  • Deze norm is ingetrokken sinds 30-09-2006

31,57

Over deze norm

Status Ingetrokken
Aantal pagina's 3
Commissie Verfwaren
Gepubliceerd op 01-04-1995
Taal Engels
Is one of four documents which specify empirical test procedures for assessing the resistance of coating films to cracking and/or detachment from the substrate under different conditions of deformation. Describes a test procedure for coating on a metallic substrate when subjected to bending under standard conditions. For a multi-coat system, each coat may be tested separately or the complete system may be tested. The mandrel shall be in the form of a truncated cone. It is mounted horizontally on a base plate. An operating lever with draw bar is provided for bending the test panel. The test panels shall be of burnished steel, busnished tinplate or soft aluminium.

Details

ICS-code 87.040
Nederlandse titel Verven en vernissen - Buigproef (conische doorn)
Engelse titel Paints and varnishes - Bend test (conical mandrel)
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen