NEN-EN-ISO 8230-1:2006 Ontw. en

Veiligheidseisen voor chemische reinigingsmachines - Deel 1: Algemene veiligheidseisen

  • Deze norm is ingetrokken sinds 28-10-2008


Over deze norm

Status Ingetrokken
Aantal pagina's 32
Gepubliceerd op 01-01-2006
Taal Engels
This part of this international standard is applicable to dry-cleaning machines of all sizes intended for industrial use (including retail shop operation) for the cleaning of articles made of textile, leather, furs and skins, using exclusively perchloroethylene or flammable solvent as cleaning medium. This part of international standard is not applicable to: - machines placed at the disposal of the general public (e.g. self-service); - barrier machines; - ironing presses (see ISO 10472-1 and ISO 10472-6); - ancillary equipment, e.g. room evacuation equipment, waste recuperation systems of the still, external water cooling systems or complementary systems for solvent recovery from the still sludge. This International Standard identifies all significant hazards arising from the use of the machine with special emphasis on solvent hazards, where "use of the machine" comprises both intended use and foreseeable abnormal situations. No specific technical advice is given for hazards (apart from the use of the machines) arising during construction, transport and commissioning, decommissioning, dismantling and disposal of the machines. This International Standard applies primarily to machines manufactured after the date of issue of this standard. It does not give specific technical advice about: - pneumatic systems; - noise; - hazards caused by processing items which may create an explosive atmosphere(e.g. printers' wipers containing a low-flash solvent); - machines processing loads which may contain "foreign solvents" which could lead to a change in a property (characteristic) of the cleaning solvent, e.g. cause foaming or make it carcinogenic; - hazards caused by neglect of ergonomic principles; - measures dealing with the containment of pressure in the machine. The guidance contained in this International Standard is based on the presumption that the designer has completed a risk analysis of the machine under consideration, see ISO 14121:1999. This will enable him to identify and fulfil the significant requirements for his machine as stipulated by this International Standard. Where for clarity an example of a safety measure is given in the text, this should not be considered as the only possible solution. Any other solution leading to the same risk reduction is permissible if an equivalent level of safety is achieved, evidence of which should be given in the manufacturer's documentation.


ICS-code 97.060
Nederlandse titel Veiligheidseisen voor chemische reinigingsmachines - Deel 1: Algemene veiligheidseisen
Engelse titel Safety requirements for dry-cleaning machines - Part 1: Common safety requirements
Vervangen door
Normatieve verwijzingen
  • 2006/42/EG, Machines



Ga naar winkelwagen