Norm

NEN-EN-ISO 898-6:2010 Ontw. en

Mechanische eigenschappen van bevestigingsartikelen van koolstofstaal en gelegeerd staal - Deel 6: Moeren met voorgeschreven proefbelastingswaarden - Schroefdraad met fijne spoed

25,62

Over deze norm

Status Ontwerp
Aantal pagina's 23
Commissie Onderdelen voor bevestiging
Gepubliceerd op 01-01-2010
Taal Engels
This part of ISO 898 specifies mechanical and physical properties of nuts with fine pitch thread made of carbon steel and alloy steel when tested at an ambient temperature range of 10 °C to 35 °C. Nuts conforming to the requirements of this standard are evaluated at that ambient temperature range. They may not retain the specified mechanical and physical properties at elevated and/or lower temperatures. This part of ISO 898 applies to nuts: - made of carbon steel or alloy steel; - with fine pitch thread M8×1 ≤ D ≤ M39×3; - with triangular ISO metric thread according to ISO 68-1 and ISO 262 (fine pitch thread); - with diameter/pitch combinations according to ISO 261 (fine pitch thread); - with specified property classes, including proof load; - with different nut styles; - with minimum height m ≥ 0,45 D; - with a minimum outside diameter or width across flats s ≥ 1,45 D; - able to mate with bolts, screws and studs with mechanical properties according to ISO 898-1. For hot dip galvanized assemblies with overtapped nuts, see ISO 10684 in addition.

Details

ICS-code 21.060.20
Nederlandse titel Mechanische eigenschappen van bevestigingsartikelen van koolstofstaal en gelegeerd staal - Deel 6: Moeren met voorgeschreven proefbelastingswaarden - Schroefdraad met fijne spoed
Engelse titel Mechanical properties of fasteners made of carbon steel and alloy steel - Part 6: Nuts with specified proof load values - Fine pitch thread
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen