Norm

NEN-EN-ISO 9554:2003 Ontw. en

Touwen - Algemene specificatie

  • Deze norm is ingetrokken sinds 17-02-2005

25,62

Over deze norm

Status Ingetrokken
Aantal pagina's 22
Commissie Touw
Gepubliceerd op 01-07-2003
Taal Engels
This European Standard specifies, for ropes of different kinds, a method of determining each of the following characteristics: - linear density; - lay length; - braided pitch; - elongation; - breaking force. The linear density, lay length and braided pitch are measured with the rope under a specified tension called the reference tension as per Annex A. The elongation corresponds to the measured increase in length of the rope when the tension to which it is subjected is increased from an initial value (reference tension) to a value equal to 50 % of the minimum specified breaking strength of the rope. The breaking force is the maximum force registered (or reached) during a breaking test on the test piece, carried out on a tensile testing machine with constant rate of traverse of the moving element. The breaking force values given in the tables of rope specifications are only valid when this type of testing machine is used. This standard also provides a method for measuring water repellency, lubrication and finish content and heat setting treatment when requested by the customer.

Details

ICS-code 59.080.50
Nederlandse titel Touwen - Algemene specificatie
Engelse titel Fibre ropes - General specification
Vervangt
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen