NEN-EN-ISO/IEC 80079-36:2012 Ontw. en

Explosieve atmosferen - Deel 36: Niet-elektrische materialen voor gebruik in explosieve atmosferen - Basismethoden en eisen

  • Deze norm is ingetrokken sinds 19-04-2016


Over deze norm

Status Ingetrokken
Aantal pagina's 83
Commissie Ontplofbare atmosferen
Gepubliceerd op 01-06-2012
Taal Engels
This standard specifies the basic method and requirements for design, construction, testing and marking of non-electrical equipment and Ex Components intended for explosive atmospheres. This standard is also applicable for the design, construction, testing and marking of components, protective systems, devices and assemblies of these products that have their own potential ignition sources and are intended for explosive atmospheres This standard does not specify requirements for safety, other than those directly related to the explosion risk. The standard atmospheric conditions (relating to the explosion characteristics of the atmosphere) under which it may be assumed that equipment can be operated are: - temperature -20 °C to +60 °C; - pressure 80 kPa (0,8 bar) to 110 kPa (1,1 bar); and - air with normal oxygen content, typically 21 % v/v. It specifies the requirements for the design and construction of equipment, intended for explosive atmospheres in conformity with all equipment EPL of Group I, II and III. This standard can be supplemented by standards concerning the specific types of protection. This standard supplements and modifies the general requirements of IEC 60079-0, except as indicated in Table 1. Where a requirement of this standard conflicts with a requirement of IEC 60079-0, as far as applicable for a non-electrical equipment, the requirement of this standard takes precedence. This standard is supplemented or modified by the following standards concerning specific types of protection: - ISO 80079-37: Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety "ch", control of ignition source "bh", liquid immersion "kh” - IEC 60079-1: Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" - IEC 60079-2: Explosive atmospheres - Part 2: Equipment protection by pressurized enclosures "p" - IEC 60079-31: Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t" Where types of protection “d”, “p”, or “t”, given above, are used for non-electrical equipment the requirements are to be applied considering the nature and ignition sources of nonelectrical equipment Abstract national


ICS-code 13.230
Nederlandse titel Explosieve atmosferen - Deel 36: Niet-elektrische materialen voor gebruik in explosieve atmosferen - Basismethoden en eisen
Engelse titel Explosive atmospheres - Part 36: Non-electrical equipment for use in explosive atmospheres - Basic methods and requirements
Vervangen door
Normatieve verwijzingen
  • 2014/34/EU,
  • 94/009/EEG, Ontploffingsgevaar en apparaten (ATEX)



Ga naar winkelwagen