Norm

NEN-ISO 10414-1:2008 en

Aardolie- en aardgasindustrie - Beproeving in het veld van boorvloeistoffen - Deel 1: Op water gebaseerde vloeistoffen

  • Deze norm is ingetrokken sinds 09-12-2008

179,33

Over deze norm

Status Ingetrokken
Aantal pagina's 91
Gepubliceerd op 01-03-2008
Taal Engels
This part of ISO 10414 provides standard procedures for determining the following characteristics of water-based drilling fluids: a) drilling fluid density (mud weight); b) viscosity and gel strength; c) filtration; d) water, oil and solids contents; e) sand content; f) methylene blue capacity; g) pH; h) alkalinity and lime content; i) chloride content; j) total hardness as calcium. Annexes A through K provide additional test methods which may be used for chemical analysis for calcium, magnesium, calcium sulfate, sulfide, carbonate and potassium; determination of shear strength; determination of resistivity; removal of air; drill-pipe corrosion monitoring; sampling, inspection and rejection; rig-site sampling; calibration and verification of glassware, thermometers, viscometers, retort-kit cup and drilling-fluid balances; permeability-plugging testing at high temperature and high pressure for two types of equipment; example of a report form for water-based drilling fluid.

Details

ICS-code 75.180.10
Nederlandse titel Aardolie- en aardgasindustrie - Beproeving in het veld van boorvloeistoffen - Deel 1: Op water gebaseerde vloeistoffen
Engelse titel Petroleum and natural gas industries - Field testing of drilling fluids - Part 1: Water-based fluids
Vervangt
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen