Norm

NEN-ISO 12003-2:2003 en

Land- en bosbouwtrekkers - Smalspoortrekkers - Deel 2: Aan de achterzijde gemonteerde anti-kantelconstructies

  • Deze norm is ingetrokken sinds 31-07-2008

114,67

Over deze norm

Status Ingetrokken
Aantal pagina's 31
Commissie Landbouwwerktuigen
Gepubliceerd op 01-01-2003
Taal Engels
This part of ISO 12003 specifies procedures for both the static and dynamic testing of roll-over protective structures (ROPS) rear-mounted on narrow-track wheeled agricultural and forestry tractors. It defines the clearance zone and acceptance conditions for rigid or tiltable, rear, two-post rollbar, frame and cab ROPS, and is applicable to tractors so equipped having the following characteristics: - a ground clearance of not more than 600 mm beneath the lowest points of the front- and rear-axle housings (not considering lower points on the axle differential); - a fixed or adjustable minimum track width of one of the two axles of less than 1 150 mm when fitted with the widest specified tyres, and with the overall width of the other axle being less than that of the first axle; - a mass greater than 600 kg but less than 3 000 kg, unladen, including the ROPS and tyres of the largest size recommended by the manufacturer.

Details

ICS-code 65.060.10
Nederlandse titel Land- en bosbouwtrekkers - Smalspoortrekkers - Deel 2: Aan de achterzijde gemonteerde anti-kantelconstructies
Engelse titel Agricultural and forestry tractors - Narrow-track wheeled tractors - Part 2: Rear-mounted roll-over protective structures
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen