Norm

NEN-ISO 12003-2:2008 en

Land- en bosbouwtrekkers - Smalspoortrekkers Deel: 2: Aan de achterzijde gemonteerde anti-kantelconstructies

143,10

Over deze norm

Status Definitief
Aantal pagina's 38
Commissie Landbouwwerktuigen
Gepubliceerd op 01-08-2008
Taal Engels
This part of ISO 12003 specifies procedures for both the static and dynamic testing of roll-over protective structures (ROPS) rear-mounted on narrow-track wheeled agricultural and forestry tractors. It defines the clearance zone and acceptance conditions for rigid or tiltable, rear, two-post roll bar, frame and cab ROPS, and is applicable to tractors so equipped having the following characteristics. A ground clearance of not more than 600 mm beneath the lowest points of the front- and rear-axle housings (not considering lower points on the axle differential). A fixed or adjustable minimum track width of one of the two axles of less than 1 150 mm when fitted with the widest specified tyres, and with the overall width of the other axle being less than that of the first axle. A mass greater than 600 kg but less than 3 000 kg, unladen, including the ROPS and tyres of the largest size recommended by the manufacturer.

Details

ICS-code 65.060.10
Nederlandse titel Land- en bosbouwtrekkers - Smalspoortrekkers Deel: 2: Aan de achterzijde gemonteerde anti-kantelconstructies
Engelse titel Agricultural and forestry tractors - Roll-over protective structures on narrow-track wheeled tractors - Part 2: Rear-mounted ROPS
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen