Norm

NEN-ISO 12917-1:2002 en

Aardolie en vloeibare aardolieproducten - Kalibreren van horizontale cilindrische tanks - Deel 1: Handmatige methoden

Volledig inclusief:

73,12

Over deze norm

Status Definitief
Aantal pagina's 18
Commissie Debiet- en hoeveelheidsmeting
Gepubliceerd op 01-08-2002
Taal Engels
This part of ISO 12917 specifies manual methods for the calibration of nominally horizontal cylindrical tanks, installed at a fixed location. It is applicable to horizontal tanks up to 4 m in diameter and 30 m in length. The methods are applicable to insulated and non-insulated tanks, either when they are above-ground or underground. The methods are applicable to pressurized tanks, and to both knuckle-dish-end and flat-end cylindrical tanks as well as elliptical and spherical head tanks. This part of ISO 12917 is applicable to tanks inclined by up to 10 % from the horizontal provided a correction is applied for the measured tilt. For tanks over and above these dimensions and angle of tilt, appropriate corrections for tilt and appropriate volume computations should be based on the "Coats" equation.

Details

ICS-code 75.180.30
Nederlandse titel Aardolie en vloeibare aardolieproducten - Kalibreren van horizontale cilindrische tanks - Deel 1: Handmatige methoden
Engelse titel Petroleum and liquid petroleum products - Calibration of horizontal cylindrical tanks - Part 1: Manual methods
Gewijzigd door

Winkelwagen

Subtotaal:

Ga naar winkelwagen