Norm

NEN-ISO 22090-3:2014 en

Schepen en maritieme techniek - Koerstransmissiesystemen - Deel 3: GNSS principes

52,53

Over deze norm

Status Definitief
Aantal pagina's 10
Commissie Schepen en maritieme techniek
Gepubliceerd op 01-03-2014
Taal Engels
NEN-ISO 22090-3 specifies general requirements, construction, performance and testing of Transmitting Heading Device using GNSS principle as required by chapter V, SOLAS 1974 (as amended). A transmitting heading device (THD) is an electric device that provides information about the ship's true heading. In addition to the general requirements contained in IMO Resolution A.694 (17) to which IEC 60945 is associated and the relevant standard for the sensing part used, the THD equipment shall comply with the following minimum requirements. Where the IMO performance standards that apply to the sensing part do not specify a geographical operating area the THD shall operate a) at a maximum rate of turn 20°/s; and b) from 70° latitude south to 70° latitude north as minimum. The THDs complying with the requirements contained in this part of ISO 22090 can be used for heading information as contained in Chapter V of the SOLAS Convention. In addition such THDs should meet the dynamic requirements contained in the HSC Code, chapter 13 for the carriage of a suitable device providing heading information.

Details

ICS-code 47.020.70
Nederlandse titel Schepen en maritieme techniek - Koerstransmissiesystemen - Deel 3: GNSS principes
Engelse titel Ships and marine technology - Transmitting heading devices (THDs) - Part 3: GNSS principles
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen