Norm

NEN-ISO 3070-2:2008 en

Beproeving van kotter- en freesmachines met een horizontale spil - Beproeving van de nauwkeurigheid - Deel 2: Vloeruitvoering met afzonderlijke vastopgestelde werkstuktafel

  • Deze norm is ingetrokken sinds 09-08-2016

161,21

Over deze norm

Status Ingetrokken
Aantal pagina's 53
Commissie Gereedschappen
Gepubliceerd op 01-01-2008
Taal Engels
This part of ISO 3070 specifies, with reference to ISO 230-1, ISO 230-2 and ISO 230-7 geometric tests, machining tests, spindle tests and tests for checking the accuracy and repeatability of positioning by numerical control of general purpose, normal accuracy, horizontal spindle boring and milling machines having a movable column and fixed table. This part of ISO 3070 also specifies the applicable tolerances corresponding to these tests. This type of machine can be provided with spindle heads of different types, such as those with sliding boring spindle and milling spindle, sliding boring spindle and facing head, or ram or milling ram. This part of ISO 3070 concerns machines having movement of the column or column saddle on the bed (X axis), vertical movement of the spindle head (Y axis), movement of the boring spindle or ram (Z axis) and, possibly, a feed movement of radial facing slide in the facing head (U axis). Some machines also have an intermediate saddle with slideways between column and bed to achieve additional movement of the column parallel to the spindle axis (W axis).

Details

ICS-code 25.080.20
Nederlandse titel Beproeving van kotter- en freesmachines met een horizontale spil - Beproeving van de nauwkeurigheid - Deel 2: Vloeruitvoering met afzonderlijke vastopgestelde werkstuktafel
Engelse titel Machine tools - Test conditions for testing the accuracy of boring and milling machines with horizontal spindle - Part 2: Machines with movable column and fixed table
Vervangt
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen