Norm

NEN-ISO 6721-8:1997 en

Kunststoffen - Bepaling van de dynamische mechanische eigenschappen - Deel 8: Trillingen in de langsrichting en op afschuiving - Methode met golfvoortplanting

73,12

Over deze norm

Status Definitief
Aantal pagina's 14
Commissie Kunststoffen
Gepubliceerd op 01-07-1997
Taal Engels
Describes an ultrasonic wave propagation method for determining the storage components of the longitudinal complex modulus L and the shear complex modulus G of polymers at discrete frequencies typically in the range 0.5 MHz to 5 MHz. The method is suitable for measuring materials with storage moduli in the range 0.01 GPa to 200GPa and with loss factors below 0.1 and around 1 MHz. With materials that have a higher loss, significant errors in velocity measurement are introduced through waveform distortion and can only be reduced using procedures that are outside the scope of this standard. The allows measurements to be made on small specimens, typically 50 mm x 20 mm x 5 mm, or small regions of larger specimens or sheets. It is therefore possible to obtain information on the homogeneity or anisotropy of modulus in a specimen.

Details

ICS-code 83.080.01
Nederlandse titel Kunststoffen - Bepaling van de dynamische mechanische eigenschappen - Deel 8: Trillingen in de langsrichting en op afschuiving - Methode met golfvoortplanting
Engelse titel Plastics - Determination of dynamic mechanical properties - Part 8: Longitudinal and shear vibration - Wave-propagation method

Winkelwagen

Subtotaal:

Ga naar winkelwagen