Norm

NEN-ISO 7539-9:2003 en

Corrosie van metalen en legeringen - Spanningscorrosiebeproeving - Deel 9: Vervaardiging en gebruik van proefstukken met scheuren voor beproevingen met een groeiende belasting of een groeiende verplaatsing

  • Deze norm is ingetrokken sinds 14-05-2008

114,67

Over deze norm

Status Ingetrokken
Aantal pagina's 27
Commissie Corrosie
Gepubliceerd op 01-06-2003
Taal Engels
This part of ISO 7539 covers procedures for designing, preparing and using pre-cracked specimens for investigating the susceptibility of metal to stress corrosion cracking by means of tests conducted under rising load or rising displacement. Tests conducted under constant load or constant displacement are dealt with in ISO 7539-6. The term "metal" as used in this part of ISO 7539 includes alloys. Because of the need to confine plasticity to the crack tip, pre-cracked specimens are not suitable for the evaluation of thin products such as sheet or wire and are generally used for thicker products including plate, bar and forgings. They can also be used for parts joined by welding. Pre-cracked specimens may be stressed quantitatively with equipment for application of a monotonically increasing load or displacement at the loading points. A particular advantage of pre-cracked specimens is that they allow data to be acquired from which critical defect sizes, above which stress corrosion cracking may occur, can be estimated for components of known geometry subjected to known stresses. They also enable rates of stress corrosion crack propagation to be determined. A principal advantage of the test is that it takes into account the potential impact of dynamic straining on the threshold for stress corrosion cracking. At sufficiently low loading rates, the KISCC determined by this method can be less than or equal to that obtained by constant load or displacement methods and can be determined more rapidly.

Details

ICS-code 77.060
Nederlandse titel Corrosie van metalen en legeringen - Spanningscorrosiebeproeving - Deel 9: Vervaardiging en gebruik van proefstukken met scheuren voor beproevingen met een groeiende belasting of een groeiende verplaatsing
Engelse titel Corrosion of metals and alloys - Stress corrosion testing - Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement
Vervangen door

Winkelwagen

Subtotaal:

Ga naar winkelwagen