Norm

NEN-ISO 871:2006 en

Kunststoffen - Bepaling ontbrandingstemperatuur met gebruik van een hete-luchtoven

52,53

Over deze norm

Status Definitief
Aantal pagina's 7
Commissie Kunststoffen
Gepubliceerd op 01-12-2006
Taal Engels
This International Standard specifies a laboratory method for determining the flash-ignition temperature and spontaneous-ignition temperature of plastics using a hot-air furnace. It is one of a number of methods in use for evaluating the reaction of plastics to the effects of ignition sources. This method does not give a direct measure of the combustibility or rate of burning of a material or any definition of the safe upper limit of temperature for the plastics in use, and it should not be used alone to describe or appraise the fire hazard or fire risk of materials, products or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire hazard or fire risk assessment which takes into account all of the factors pertinent to an assessment of the fire hazard of a particular end use. Tests made under conditions of this method can be of considerable value in comparing the relative ignition characteristics of different materials. Values obtained represent the lowest ambient air temperature that will cause ignition of the material under the conditions of this test. Test values are expected to rank materials according to ignition susceptibility under actual use conditions.

Details

ICS-code 13.220.40
83.080.01
Nederlandse titel Kunststoffen - Bepaling ontbrandingstemperatuur met gebruik van een hete-luchtoven
Engelse titel Plastics - Determination of ignition temperature using a hot-air furnace
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen