Norm

NPR-CLC-IEC/TS 60034-27:2011 en

Roterende elektrische machines - Deel 27: Meting van partiƫle ontladingen aan de isolatie van statorwikkelingen bij van het voedende net gescheiden roterende elektrische machines

226,42

Over deze norm

Status Definitief
Aantal pagina's 114
Commissie Elektrische machines
Gepubliceerd op 01-03-2011
Taal Engels
This part of IEC 60034 which is a technical specification provides a common basis for - measuring techniques and instruments, - the arrangement of test circuits, - normalization and testing procedures, - noise reduction, - the documentation of test results, - the interpretation of test results with respect to partial discharge off-line measurements on the stator winding insulation of rotating electrical machines when tested with alternating voltages up to 400 Hz. This technical specification applies to rotating machines having bars or form wound coils with conductive slot coating. This is usually valid for machines with voltage rating of 6 kV and higher. The measurement methods described in this specification may also be applied to machines without conductive slot coating. However, results may be different and are not covered by this specification.

Details

ICS-code 29.160
Nederlandse titel Roterende elektrische machines - Deel 27: Meting van partiƫle ontladingen aan de isolatie van statorwikkelingen bij van het voedende net gescheiden roterende elektrische machines
Engelse titel Rotating electrical machines - Part 27: Off-line partial discharge measurements on the stator winding insulation of rotating electrical machines
Vervangt

Winkelwagen

Subtotaal:

Ga naar winkelwagen