Norm

NPR-CLC/TS 50537-1:2010 en

Spoorwegen en soortgelijk geleid vervoer - Toebehoren voor tractietransformatoren en hun koelsysteem - Deel 1: Hoogspanningsdoorvoerisolatoren voor tractietransformatoren

49,30

Over deze norm

Status Definitief
Aantal pagina's 19
Commissie Elektrisch materieel, systemen en elektronische toepassingen voor spoorwegen en soortgelijk geleid vervoer
Gepubliceerd op 01-02-2010
Taal Engels
This Technical Specification is applicable to high voltage (HV) bushings, intended for use in traction transformers of rail vehicles, cooled by insulating liquid with rated voltages up to 25 kV single phase and rated currents up to 630 A at frequencies from 16,7 Hz to 60 Hz. HV bushings within the scope of this Technical Specification are bushings for separable connectors that connect the power supply coming from a contact wire or from a contact rail to the primary winding of the traction transformer. The Technical Specification only deals with HV bushings that are mounted to the transformer. CLC/TS 50537-1 gives consideration to both technical and normative requirements of the railway environment and restricts the variety provided by industry-wide standards for bushings, such as EN 50180 and EN 60137. It determines requirements and tests enabling the interchangeability especially regarding electrical and mechanical interfaces. Furthermore, service conditions are described. The cable plug as the counterpart of the HV bushing's plug-in end is not covered by this Technical Specification.

Details

ICS-code 29.180
45.060.10
Nederlandse titel Spoorwegen en soortgelijk geleid vervoer - Toebehoren voor tractietransformatoren en hun koelsysteem - Deel 1: Hoogspanningsdoorvoerisolatoren voor tractietransformatoren
Engelse titel Railway applications - Mounted parts of the traction transformer and cooling system - Part 1: HV bushing for traction transformers

Winkelwagen

Subtotaal:

Ga naar winkelwagen