Norm

NPR-ISO/TR 19688:2019 en

Rotodymanische pompen - Hydraulische prestatie-acceptatietest met behulp van een modelpomp

144,92 175,35 Incl BTW

Over deze norm

Status Definitief
Aantal pagina's 44
Commissie Pompen
Gepubliceerd op 01-01-2019
Taal Engels
NPR-ISO/TR 19688 describes hydraulic performance tests (including cavitation tests) using a small size pump (centrifugal, mixed flow or axial pump, hereinafter referred to as a “model pump”). This document is used for pump acceptance tests with a geometrically similar model pump to guarantee the performance of a large size pump manufactured for practical use (hereinafter, a “prototype pump”). This document, however does not preclude a temporary assembly inspection or other tests on the prototype pump. Moreover, it is preferable to conduct the tests with prototype pumps unless - the capacity of the pump, namely its flow rate and/or its power input, is beyond the limitations of the test facility, though it is difficult to set a criterion for carrying out a model pump test instead of the prototype pump test in terms of the volume rate of flow or the power input, - a part of the pump is to be constructed by concrete walls and reproduction of the whole assembly is impractical, - model tests are specified by the purchaser, or - it is difficult to carry out the prototype pump test due to any other reasons. This document applies to performance tests under steady operating conditions corresponding to the prototype pump.

Details

ICS-code 23.080
Nederlandse titel Rotodymanische pompen - Hydraulische prestatie-acceptatietest met behulp van een modelpomp
Engelse titel Rotodymanic pumps - Hydraulic performance acceptance test using a model pump

Winkelwagen

Subtotaal:

Ga naar winkelwagen